Arsenic Low Range Quick™ II

for Water Quality Testing (481301)

---

Click here to read the ETV Verification Announcement!

	Part #	Price	Number of Tests	Sensitivity	Total Test Time
	481301 larger picture	N/A	50 Tests	<0.5, 1.0, 1.5, 2, 3, 4, 5, 6, 7, 8, 12, >20, >30, > 50 ppb (μg/L)	12 Minutes
Arsenic Low-Range Quick™ 5 Test Mini-Kit
	Part #	Price	Number of Tests	Sensitivity	Total Test Time
	481301-5	N/A	5 Tests	<0.5, 1.0, 1.5, 2, 3, 4, 5, 6, 7, 8, 12, >20, >30, > 50 ppb (μg/L)	14 Minutes

Quick^TM Arsenic tests were developed with considerations for safety, sensitivity, easy-of-use, and speed.

Safety has not been compromised for convenience in the Arsenic Quick™ family of arsenic field test kits. All reagents are in powder form and have been carefully selected to minimize the hazards associated with conventional arsenic testing. All components needed to accurately detect and measure arsenic are included in a portable ready-to-use kit.

Our easy to follow test procedure requires only three reagents and as little as 12 minutes to perform. Reagents are clearly labeled and color coded to make arsenic testing error free. A colorimetric test strip is used to take the guesswork out of accurate arsenic measurement. The matching color chart is thoughtfully printed with extra large color blocks and contrasting colors for quick and accurate determinations.

Here's how it works:

First, your water sample is mixed in the supplied reaction vessel with reagent #1 (Tartaric acid with rate enhancers). This will acidify your water sample. Reagent #2, an oxidizer, is then added to remove hydrogen sulfide interference. Finally, with the addition of Zinc powder, reagent #3, inorganic arsenic compounds (As⁺³ and As⁺⁵) are reduced to arsine gas. A test strip is used to measure the arsine gas concentration in the water sample.